Ever needed help fitting one of our CT Products? By following this simple step-by-step guide you will learn how to fit our BMW Carbon Fibre Spoilers or BMW Gloss Black Spoilers

How To Fit a Carbon Fibre Spoiler (Universal)

Fitting Kit Includes:

- Double Sided Tape

The Guide:

If your car does not have a boot lip spoiler fitted already, skip Steps 1-2

Step 1

Using a Heat Gun (or Hair dryer) warm the original spoiler to make the tape holding it on softer and easier to cut.

- Use fishing wire to cut the tape holding the original spoiler to remove it.

Step 2

- Use a Toffee Wheel to remove the left over tape on the boot lid.

- Once the majority of the tape has been removed, use Tar and Glue Remover to remove any traces left.

- Polish and wipe down the boot lid to prepare it for the new spoier. 

Step 3

- Apply the tape to the spoiler generously, making sure you apply it right to the edge of the spoiler all the way around.

- Once the tape is on, test fit the spoiler to ensure it fits on the boot lid nice and flush.

Step 4

- Once you're happy with the spoiler fitment, peel the tape red film and position it as per the picture bellow, (do this on the top edge of the spoiler and the bottom)

Step 5

Position the spoiler lip back into place and pull the tape red film out.


Shop For Your F80 M3 & F82/F83 M4 Here

Watch Our YouTube Video

This fitting guide offers only guidance for the self-installation of our products at your own risk, however, we always recommend a professional fitting at a reputable garage or Bodyshop.  As such we do not accept any responsibility or liability for issues or damage encountered during self-installation.

By CT Carbon


Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page